OPEI: TIPS FOR SAFE WINTER GENERATOR USAGE
Dec. 3, 2018
Source: Outdoor Power Equipment Institute (OPEI) news release
Alexandria, Virginia -- Winter is here, and if your electricity goes out due to snow and ice, a generator can keep your power flowing to your home or business. The Outdoor Power Equipment Institute (OPEI), an international trade association representing small engine, utility vehicle and outdoor power equipment manufacturers and suppliers, reminds home and business owners to keep safety in mind when using generators this winter.
"Not having power when you need it is frustrating, so a generator can provide emergency backup power at a reasonable cost," says Kris Kiser, President and CEO of OPEI. "It's important to follow all manufacturer's instructions, and never place a generator in your garage or inside your home or building. It should be a safe distance from the structure and not near an air intake."
More tips include:
#1 - Take stock of your generator. Make sure equipment is in good working order before starting and using it. Do this before a storm hits.
#2 - Review the directions. Follow all manufacturer's instructions. Review the owner's manuals (look manuals up online if you cannot find them) so equipment is operated safely.
#3 - Install a battery operated carbon monoxide detector in your home. This alarm will sound if dangerous levels of carbon monoxide enter the building.
#4 - Have the right fuel on hand. Use the type of fuel recommended by the generator manufacturer to protect this important investment. It is illegal to use any fuel with more than 10% ethanol in outdoor power equipment. (For more information on proper fueling for outdoor power equipment visit www.LookBeforeYouPump.com). It's best to use fresh fuel, but if you are using fuel that has been sitting in a gas can for more than 30 days, add fuel stabilizer to it. Store gas only in an approved container and away from heat sources.
#5 - Ensure portable generators have plenty of ventilation. Generators should NEVER be used in an enclosed area or placed inside a home, a building, or a garage, even if the windows or doors are open. Place the generator outside and away from windows, doors, and vents that could allow carbon monoxide to drift indoors.
#6 - Keep the generator dry. Do not use a generator in wet conditions. Cover and vent a generator. Model-specific tents or generator covers can be found online for purchase and at home centers and hardware stores.
#7 - Only add fuel to a cool generator. Before refueling, turn the generator off and let it cool down.
#8 - Plug in safely. If you don't yet have a transfer switch, you can use the outlets on the generator. It's best to plug in appliances directly to the generator. If you must use an extension cord, it should be heavy-duty and designed for outdoor use. It should be rated (in watts or amps) at least equal to the sum of the connected appliance loads. Make sure the cord is free of cuts, and the plug has all three prongs.
#9 - Install a transfer switch. A transfer switch connects the generator to the circuit panel and lets you power hardwired appliances. Most transfer switches also help avoid overload by displaying wattage usage levels.
#10 - Do not use the generator to "backfeed" power into your home electrical system. Trying to power your home's electrical wiring by "backfeeding" - where you plug the generator into a wall outlet - is dangerous. You could hurt utility workers and neighbors served by the same transformer. Backfeeding bypasses built-in circuit protection devices, so you could damage your electronics or start an electrical fire.
For more safety tips for outdoor power equipment visit http://opei.org/safety-tips/
The Outdoor Power Equipment Institute (OPEI) is an international trade association representing more than 100 power equipment, engine and utility vehicle manufacturers and suppliers. OPEI is the advocacy voice of the industry, and a recognized Standards Development Organization for the American National Standards Institute (ANSI) and active internationally through the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) in the development of safety and performance standards. OPEI is managing partner of GIE+EXPO, the industry's annual international trade show, and the creative force behind the environmental education program, TurfMutt.com. OPEI-Canada represents members on a host of issues, including recycling, emissions and other regulatory developments across the Canadian provinces. For more information, visit www.OPEI.org.